Test Results: Cisco AS5350

Cisco AS5350 Universal Gateway IOS 12.2(2)XU1

Test #	Direction	Transport	Image File	Error Correction	Data Rate Mgt.	Image Encoding	Polling
1	originate	UDP	ccitt2p.tif	redundancy 0	method 2	MR	no
2	originate	UDP	100page.tif	redundancy 0	method 2	MR	no
3	originate	TCP	ccitt2p.tif	redundancy 0	method 1	MR	no
4	originate	UDP	ccitt2p.tif	redundancy 3	method 2	MR	no
5	originate	TCP	ccitt2p.tif	FEC 2 frm 3 span	method 2	MR	no
6	originate	UDP	dither1d.tif	redundancy 3	method 2	MR	no
7	originate	UDP	ccitt2p.tif	redundancy 3	method 2	ECM	no
8	originate & poll to rx	UDP	ccitt2p.tif	redundancy 3	method 2	MR	poll RX
9	answer	UDP	ccitt2p.tif	redundancy 0	method 2	MR	no
10	answer	UDP	100page.tif	redundancy 0	method 2	MR	no
11	answer	TCP	ccitt2p.tif	redundancy 0	method 1	MR	no
12	answer	UDP	ccitt2p.tif	redundancy 3	method 2	MR	no
13	answer	TCP	ccitt2p.tif	FEC 2 frm 3 span	method 2	MR	no
14	answer	UDP	dither1d.tif	redundancy 3	method 2	MR	no
15	answer	UDP	ccitt2p.tif	redundancy 3	method 2	ECM	no
16	answer & polled to tx	UDP	ccitt2p.tif	redundancy 3	method 2	MR	polled TX

Results

Test 1 – passed
Test 2 – incomplete, fax machine ran out of paper after 53 pages.
Test 3 – TCP is not supported by CISCO gateways.
Test 4 – passed
Test 5 – TCP is not supported by CISCO gateways.
Test 6 – failed (This is a ~1MB alternating white and black (dithered) image.) The fax terminal or the gateway, not sure which yet, hung up after sending only 512 bytes. Will retry the test with Faxlab instead of the fax terminal. Test also will not complete with Telegra for different reason – could be that Telegra has limitation on image size. Verified that this test works with our software using loopback.
Test 7 – need special config for fax machine.
Test 8 – need special config for fax machine.
Test 11 – TCP is not supported by CISCO gateways.
Test 13 – TCP is not supported by CISCO gateways.