TI Selects OpenEndpoint for their Solutions Initiative Program

OpenEndpoint

Commetrex’ OpenEndpoint provides the telephony software required to implement an IP endpoint voice-fax gateway. OpenEndpoint includes POTS interface software, signal generation-detection, packet voice, and T.38 and/or I.366.2 fax relay executing in Commetrex’ OpenMedia standards-based streams framework. All the OEM need add for a complete IP endpoint product is the signaling and application software. H.323 is optionally available. Although the software is available in portable-C format, a highly optimized version is available for the Texas Instruments TMS320C6000 family of high- performance DSPs. A single low-cost 200-MHz ‘C6000 provides, for example, 12 non- blocking channels running G.723.1.

The basic OpenEndpoint includes the POTS interface supporting both FXS and FXO interfaces, G.711 and G.726 voice coders, fax modems through V.17, T.38, caller ID transmit and detect, call classifier, and OpenMedia. G.723.1 and G.729a/b vocoders are optionally available, as is I.366.2 ATM fax relay.

Features

• MSP Consortium M.100-conformaning OpenMedia streams environment with TI express DSP support
• POTS interface subsystem
• Signal generator-detector (DTMF, etc.)
• Call classifier
• G.711, G.726, G.723.1, G.729a/b vocoders
• G.168 Echo Canceller
• Packet-voice buffer management
• V.21, V.27ter, V.29, V.17 fax modems
• T.38 and optional I.366.2 fax relay
• Bellcore and ETSI Caller ID Transmit (GR-30-CORE, LSSGR ETS 300 659-1, ETS 300 659-2)
• Integrated field-proven system
• Integrated or external system control

Benefits

• Open architecture and source-code licensing allow full OEM control
• Proven POTS software eliminates field problems
• Reduced development expense
• Minimum time to market
• Fax relay means clean faxes
• Product flexibility

License Options

• Paid-up limited-use source code
• Corporate license
• Sub-license license
• Royalty based
• Object code

OpenMedia
OpenMedia conforms to the MSP Consortium, Inc. (http://www.msp.org) M.100 specification of a multi- stream integrated-media streams framework. OpenMedia can execute entirely on a DSP, entirely on a host or co- processor or partitioned across multiple processors. The latter system partitioning is often used in high-capacity systems where a blade includes multiple DSPs and one or more co-processors. This configuration permits all but a small-footprint execution controller to be partitioned onto non-DSP processors.

But OpenMedia is just as suitable to host-based signal processing. Commetrex uses it to implement OpenEndpoint with the MSP-H8 PCM interface PCI board.

POTS Software
IP endpoints that interface with either the PSTN or with legacy fax terminals or voice stations will have a PCM- and line-supervision interface for each analog line. These interfaces must translate call-control requests into the correct manipulations of hook status for outbound and ringing and loop-current status for inbound calls. The software includes a small executive that sequences the execution of state machines which implement each line- control function.

General Telephony
A system that supports analog lines must have the ability to generate and detect in-band tones, such as DTMF, monitor the state of outbound calls using call-progress analysis, and to classify calls to determine whether to apply voice, fax, or data-modem specific processing.

Voice Processing
OpenEndpoint includes the most popular vocoders and the voice-specific packet management needed to provide clear low-bandwidth voice. A G.168 echo canceller is included.

Fax Processing
OpenEndpoint includes Commetrex’ acclaimed PowerRelay, offering T.38 IP-based real-time fax in the based configuration; I.366.2 is optionally available for those systems using ATM. Both can be included for applications that must support both IP and ATM protocols.

Modem Data
The OpenEndpoint call classifier will determine whether a POTS call is voice, fax, or a data modem. Each requires media-specific processing for accurate transport. In 4Q 2002 the ITU has yet to determine the V.MoIP recommendation for modem relay. In the interim, OpenEndpoint switches to full-duplex G.711 (64-Kbits in each direction) for data-modem calls.

Related Product Bulletins

• OpenMedia
• G.711, G.726
• Caller ID
• PowerRelay T.38 Fax Relay
• Fax Modems
• Signal Generator-Detector
• Call Classifier
• MSP-H8 8-Line Analog PCM Interface